# How do i know what size curtains to buy

## How wide should curtains be for 72 inch window?

To get the measurements, measure the width of the rod from left to right. For instance, if your window measures 72” wide, you will need curtains that will give a maximum width of 144” (window width x 2 = 144”.)

## What size curtains will I need?

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

## How wide should curtains be for 36 inch window?

Example: If your window measures 36? wide (window width x 2 = 72?), you need curtains that will give a minimum width of 72? or 2 panels for that window. In this case 2 panels will give about 100? to 120? of width which will look nice and full. Always round up to the next full number.

## How do you measure yourself for curtains?

To measure fabric for curtains, start by measuring the width and height of your window. If you want floor length curtains, measure from the bottom of the window to the floor, subtract 1 inch, and add that number to the height of the window to get the height of the fabric you should use.

## How much bigger should curtains be than window?

How wide should curtains be? To ensure that curtain panels look ample when closed, they should have a combined width that is 2 to 2.5 times the width of the window/rod. That means if you are ordering Grommet style or Rod-pocket style, the total drapery width should be at least 2 times the window/rod widths.

## How far below the window should curtains hang?

While fashion once dictated a “flood level” bottom line for curtains—one that hung just past the window sill, short enough that it would not get wet in a flood—today, style calls for curtains to either hang down to within ½-inch of the floor or even puddle slightly.

## What size curtains do I need for a 48 inch window?

Curtain Width Guide

If you hang a 48-inch panel on a 48-inch window, there will be no fullness or draping. According to Curtainshop.com, finished curtains should be twice the width of the window, so if your window is 36 inches wide, you need panels that are at least 72 inches across.

## What is the standard drop for curtains?

Most curtain designs come in standard drop sizes of 54”, 72”, 90” and 108” so you may have to round up to the nearest size. For example, if you measure your drop and it is 147cm (58”) in length and you wanted your curtains to sit off the floor you would round this up to the 72” drop curtains.

## How wide should curtains be for 60 inch window?

For a 60 inch (152.4cm) window, you need curtains with a finished width at least 1.5 times that, but better are those with twice that width and even three times the width for sheers. Therefore, for a 60 inch window, you need two panels of 60 inches each for twice the width and a luxurious gather.

## Can I use 3 curtain panels?

Feed all three panels onto a rod through the upper casing or tabs, making sure all three are right side out. Better Homes & Gardens advises using a curtain rod that is wider than your window.

## Do I need one or two curtain panels?

If you have larger windows, you may want to consider two curtain panels. They do fit better in the window, requiring a little less material than a single panel. It can sometimes be cheaper buying two smaller panels than one larger one. The double panels can also look better for larger windows.

## How far should a curtain rod extend past window?

As a general rule, drapes will be open during the day, so make sure the curtain rod extends at least four inches on each side of the window’s inside frame. To create the illusion of a wider window, extend the rod up to 10 inches beyond the window’s frame.

## What is the standard width of curtains?

In the US, the standard curtain width would be 54”. But generally, it ranges from 50-58”. Some curtain manufacturers even go for as long as 108”. Again, knowing the curtain width is as essential as the length because you have to align it with standard curtain sizes.

## How wide should curtains be for 96 inch window?

Following the rule of thumb, curtains for a 96-inch window should range between 192 and 240 inches wide. To get a fuller look, aim for 288 inches wide. For decorative curtains, you can pick out something as narrow as 144 inches.

## What do curtain sizes mean?

Curtain measurements are always written with the width first and then the length. For example, a panel that is 46? x 54? is 46 inches wide and 54 inches long. Don’t buy your curtains just so they’re big enough to cover a window.

## Should curtains go to the floor?

Yes, They should! The length of the curtain determines the height of the curtain rod. Therefore, even if you buy curtains that are 84 inches long, if the curtains hang from the rod without rings, the rod must be approximately 84 inches from the floor to enable the curtain to touch the floor and avoid the awkward look.

## Do bedroom curtains have to touch the floor?

Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.

## Should all curtains be the same length?

Make sure your curtains are long enough.

Short curtains make a room look awkward and incomplete. Generally, you should avoid anything shorter than 96 inches, unless you have very low ceilings. When in doubt, go with longer curtains rather than a shorter, cut off length.

## How do you calculate fabric for curtains?

There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).

## How wide should curtains be for a 120 inch window?

For a 120-inch window, how wide should curtains be? Depending on the weight of the fabric and how much you want the curtains to be. At least a width and a half is what I would recommend. 180 inches is the width of each curtain.

## How many curtain panels should I hang?

Determine the number of panels you need to order: ~ Multiply window width by 1.5 to 2 if you want curtains loosely gathered for a relaxed, tailored look. Divide your total by the width of a single curtain panel to get the number of panels you need.

## Can you double up on curtains?

Sheers and drapes: The most common and practical method for layering curtains. Use double brackets and double curtain rods to layer a sheer curtain under an opaque or blackout drape or curtain. This technique allows sunlight to shine through while still maintaining privacy.

## Why are curtains sold as one panel?

Curtain panels that are sold in individual packs are more affordable for the bottom line because people can buy the exact number of panels they need to decorate their windows. There are no extra costs to eat because you pay for what you need and that’s that.

## How high do you hang 84 inch curtains?

When you buy them in stores or online, there are two standard lengths: 84 inches and 95 or 96 inches. The length of the curtain dictates the height of the rod. If you buy 84-inch-long curtains, the rod must be mounted roughly 84 inches from the floor if the curtains hang from the rod without rings.

## Is it OK to put one curtain on a window?

Yes, you can use just one curtain panel. This is sometimes called single panel curtains. Individual panel curtains work exceptionally well for sliding doors or smaller windows. Most people consider two curtain panels to have a “fuller” or a more finished look, but using a single panel gives a room a unique feel.

## How far from the ceiling should you hang curtains?

How High to Hang Curtains 8 Foot Ceiling. An 8 foot ceiling is pretty standard for a residential home. With this standard height will be safe to put the rod about 6 inches above the top of the framing of the window. This avoids any extra framing and gives space between the frame and the rod.

## How high do you hang 84 inch curtains with grommets?

If you are interested in a curtain with grommet tops, there will usually be an inch and half of fabric above the top of the grommet. Therefore, an 84 inch length curtain with grommet tops will have an actual hanging height of around 82.5 inches.

## Should curtains go past the window sill?

In formal or dressy rooms, curtains should just touch the floor. A romantic room deserves elegant, extra-long curtains that pool or puddle on the floor. Curtains to the sill, or to the bottom of the window trim (called the apron), look great and are practical in a kitchen.