How do i know what size toilet seat to buy

How do I know what toilet seat will fit my toilet?

Does it matter what size toilet seat to buy?

If your toilet is curvy, it will roughly be 16 inches or 18 inches. This is the regulated length of an American standard toilet. If your toilet is 16 to 17 inches long, buy a round toilet seat. If it’s 18 to 19 inches, you need an elongated elliptical toilet seat.

Do all toilet seats fit the same?

No, not all toilet seats fit the same because toilets come in a variety of different shapes, so you’ll need to check yours before buying. There are three types of toilet shapes commonly found in UK homes. These are round, D-shape, and square seats.

Do toilet seats come in different sizes?

Toilet seats come in many different sizes, shapes, and colors. You have to consider the shape of your toilet bowl. You should not buy elongated seats if you have a round bowl and you should not buy a round toilet seat if you have an elongated bowl.

How do you tell if you have a round or elongated toilet?

Toilet seats are sold by shape (not by length).

If the length is between 18-19.5 inches, you have an elongated toilet bowl seat. If the length is between 17-17.75 inches, you have a round toilet bowl seat. Notice also that the elongated bowl is shaped more like an oval (egg-shaped).

Can I put an elongated toilet seat on a round toilet?

An elongated toilet seat will technically fit on a round toilet, but the fit and comfort may be compromised. An elongated toilet seat will likely overhang a round toilet which may be fine unless the rim of the toilet is visible within the opening of the toilet seat.

What size is a standard round toilet seat?

First off, the measurements. Round toilet seats measure about 16.5 inches long and about 14 inches wide. In general, round toilet seats are more common in homes and houses. They are also used more often in smaller bathrooms because they take up less space than their elongated counterparts.

How often should you replace a toilet seat?

Q. Why should I replace my toilet seat? While a toilet typically lasts at least 15 years, toilet seats last only about 5 to 7 years before they begin to crack or become stained to the point that, no matter how hard you scrub, they no longer appear clean. That’s when it’s time to consider replacement.

What is the average size of a toilet seat?

Typical width: 14″ – 14-1/2″ Typical round length: 16″ – 17″ Typical elongated/extended length: 18″ – 19″

What size are toilet seat bolts?

The bolts have a 7/16-inch diameter that fits most standard toilet seats.

Are all toilet seat bolts the same size?

For your reference, the standard measurement for US toilet seat bolts is 5.5 inches. Measure the width of the bowl at its widest point. Be sure to place your measuring tape on the outside of the brim for an accurate dimension.

How do you replace an old toilet seat?

Do all elongated toilet seats fit?

It’s a good thing they ask, because toilet seats are designed to fit one of two bowls: round or elongated. A round toilet seat absolutely won’t fit an elongated bowl, and, as you may have guessed, the opposite is also true.

How do I know what type of toilet I have?

Finding your toilet manufacturer and/or model number: Carefully remove the toilet tank lid and set it gently on the floor, with the bottom facing up. Look for the manufacturer name or a number on the bottom side of the water tank lid.

Are 1 piece toilets better?

The one-piece toilet is easier to clean because there is no gaps or joint between the toilet tank and the bowl. And its a lot more hygienic since there is no place for dirt and grime to gather. Most people choose one-piece design mainly for this reason.

Are wood or plastic toilet seats better?

Plastic toilet seats are priced the same as wood, and they’re more durable and easier to clean. The only advantages of wood – a more reliable temperature and a superior look – can be negated by features available for plastic seats.

Why are toilet seats split in the front?

Simnick explains that the open seat was designed to allow women “to wipe the perineal area after using the water closet” without contacting a seat that might be unhygienic. The U-shaped seat in public restrooms is a requirement of IAPMO’s Uniform Plumbing Code.

How tall is a chair height toilet?

Also referred to as a comfort height toilet, a chair toilet is at times known as an ADA toilet, an acronym for the Americans with Disabilities Act. The reason is that from the top of the seat to the floor, the chair height measures anywhere between 17 inches and 19 inches.

Are toilet seats standard size UK?

There is no universal standard for toilet or toilet seat sizes in the UK. However, certain patterns have developed. The following combinations of toilet seat lengths and widths are relatively popular: width 35 cm, length 40-41 cm.

What size is an elongated toilet?

Elongated bowls have a slightly longer length and typically measure 18 to 19 inches. Both round and elongated bowls are usually about 14 to 14 and a half inches wide.

Can you replace the hinge on a toilet seat?

Over time, these hinges can break or wear out, requiring replacement. If your toilet seat hinges are broken or stripped out, you do NOT need to change the whole toilet seat, but instead only the hinges. With the right tools and spare parts, you can easily replace your toilet seat hinges.

What are toilet bolts called?

Securing your toilet to the floor are two long bolts (called closet bolts) that come up through the base of the toilet and are secured with nuts.

What are the parts of a toilet seat?

Toilet Bowl Parts

  • Lid: It covers the toilet seat and can act as a safety barrier. …
  • Seat: The toilet seat is attached to the bowl. …
  • Rim: The uppermost part of the toilet bowl, the rim runs around the top of the bowl. …
  • Toilet flange: This fitting seals the toilet to the floor and connects to the drain pipe.

How do I stop my toilet seat from sliding sideways?

How to Fix a Loose Toilet: Locate and install seat stabilizers. Then install a set of toilet seat stabilizers, such as Safe-T-Bumpers. Loop the rubber band around the toilet seat and center the stabilizers so they touch the inside rim of the bowl. Drill a starter hole and secure the stabilizers with screws from the kit …

What tools do you need to replace a toilet seat?

What you’ll need:

  1. Replacement toilet seat.
  2. Tape measure.
  3. Screwdriver.
  4. Pliers.
  5. Rust penetrant (optional)
  6. ½” OR 5/8” socket or combination wrench, depending on the toilet seat.

How do you get rusted wing nuts off a toilet seat?

The best way to do this is by equipping a Dremel rotary tool with a cutting blade. Then, from the underside of the toilet, cut through the nut and bolt at a 45-degree angle. Once cut this way, you can easily pull the bolt out from the top. Use this Dremel equipped with a cutter blade to cut through rusted bolts.

How do you remove rusted toilet seat bolts?

First, protect the top of the toilet with strips of duct tape or thin cardboard. Then use a close-quarter hacksaw like the one shown above to cut through the bolts. If you don’t have this type of saw, remove the blade from a standard hacksaw and use it by itself to cut through the rusted bolts.

Frequent Searches Leading to This Page

Toilet seat sizes guide, Toilet seat sizes canada, Toilet seat replacement, Toilet seat sizes home depot, Home depot toilet seats, Elongated toilet seat, Toilet seat dimensions cm, Round toilet seat.

Leave a Comment